Music Playback - RADIO.CUBO TS522D+S Bedienungsanleitung

MUSIC PLAYBACK

The device you wish to associate with TS522D+S must support AVRCP (Audio Video Remote
When the music is playing:
1. Button PLAY/PAUSE
a. Press once to pause playback
b. Press again to resume playback
2. VOL - button
a. Press once to decrease the volume by one step
b. Press and hold to decrease the volume in a consistent manner
3. VOL + button
a. Press once to increase the volume by one step
b. Press and hold to increase the volume in a consistent manner
after reaching the maximum level, the display will show the label VOL MAX)
CAUTION:
listen to music at a moderate volume. Continuous exposure to high volume may damage your
hearing.
CONNECT THE LAST PAIRED BLUETOOTH ENABLED DEVICE
The following is a quick way to connect TS522D+S to the last paired device.
When the product is in standby mode, press the STANDBY button and enter the BT mode
using the MODE
you see BT). Turn on the Bluetooth device to be associated. It will be connected automatically.
the last paired device, it will go into standby mode waiting for connection. In this status, the
previously paired devices may be connected to the unit.
RESETTING THE UNIT'S MEMORY
an interval of about one second between presses) until it plays a "beep" sound. At this point, the
CAUTION:
After erasing all memory, the unit will go immediately into pairing mode and you will need to
follow the pairing and connection procedure of a new Bluetooth device.
Remember to delete the name of the radio also from the device you want to connect it to again,
in order to completely reset the pairing between the two devices.
(from the main unit, rotate the VOL/STB knob counter-clockwise)
(from the main unit, rotate the VOL/STB knob counter-clockwise)
33
MODE button until