Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety regulation
•
Installation has to be conform the manual. Disregard or change of installation can
result on serious damages to people and material for which the manufacturer refu-
ses to accept any liability or obligation under warranty.
•
The windresistance of an open umbrella is limited and related of the anchoring.
Movable base are less stable than installation fixed to the ground.
•
The ground anchorage has to be fitted accoriding the related fitting instruction.
Fitting has to be carried out by a specaialist with construction know-how.
•
The umbrella must not be altered or draped with a different material. Stability,
function and/or closing mechanism may deteriorate.
•
Use only original accessory and spare parts from Shademaker.
•
•
Positioning and opening:
•
Place anchor (eg. base), put pole into the support tube and tighten it with the
locking lever.
•
Freed manually the ribs before opening the first time. Pull rope slowly until canopy
is taut. Never force the ribs.
•
D) Lock the rope with the integreted clamp in the hub (6), coil the rope and put
onto the hook.
•
C) IMPORTANT: After the first opening you MUST insert the spacer-buttons with
enclsoed screws onto each rib. Holes on each rib have been predrilled. The spa-
cer buttons prevent the ribs from closing completely and make it much easier to
reopen the umbrella.
•
E) Optional available: LED-Light which can be fixed onto the pole.
Closing:
•
Pull rope out of clamp and release rope carefully until umbrella is folded down.
•
B) Pull out the fabric individually and completely between the ribs, apply the layers
tight arround the pole and secure with the strap.
•
Optional available: Protective cover to protect your fabric and prolong the life of
the canopy.
If the wind freshens up the sunshade must be closed.
Unattended sunshades must not be left open!
GB
Werbung
