Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS
MODEL:
SLV15S/CH
SLV15HP/CH
Before using or installing the light fixture, kindly read the instructions and follow safety rules or let qualified
person/company mount it.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Input voltage: 230V~50Hz
Power: 15W
Supply in standby mode: <1,5W
Protection: IP44
Protection class: I.
Ra: 70
Beam angle: 120°
Lamp rotation: ±45° - horizontally, 135° - vertically
Angle of detection: 130° - horizontally, 60° - vertically
Rotation of sensors head: ± 45° - horizontally,
0° - vertically
Reach: max. 8m, adjustable (SENS), logarithmic scale
Time setting: 10s (±5s) to 4 min (±1min), adjustable
(TIME), logarithmic scale
Twilight setting: 10-2000 lx, adjustable (LUX),
logarithmic scale
Material: aluminium, plastic
Location: interiors, exteriors
Operating temperature: -10°C~+50°C
Terminal block: 3x1,5mm²
Dimensions: 210x170x240mm
Weight: 730g
Installation
1
2
135°
240mm
210mm
170mm
45°
45°
SLV15S/CH
5
500lm
SLV15HP/CH
27
1200lm
Notice
Before using, check the product and make sure there is no
damage, otherwise do not use it.
Before any manipulation assure that mains electrical supply is
disconnected.
In case of damage do not repair or disassemble the product.
For the best functional results, move toward the sensor (see to
pic. 6). The incorrect function of the product can be caused by
interruption of electromagnetic field, small temperature
difference between moving object and surroundings, reflection
(e.g. strong luminous source). LED are not replaceable.
Infringement of any instruction mentioned in instruction
manual can cause harm to health or property.
3
Terminal block
Mains supply cable
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor
notices the change and initiates trigger order „Light on" for adjusted time.
Reach setting (sensitivity) – SENS (max.8m)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed by knob.
Time setting (switch-off delay) – TIME (10s (±5s) till 4min (±1min))
Selected time interval begins after each detected movement. We recommend setting the function on minimum during
test.
Twilight setting (response threshold) – LUX(10 – 2000lx)
We recommend setting the function on maximum during test.
Stated information may differ according to position and installation height.
Position marked - or applies to minimum and position marked
If the product is mechanically damaged or connected unprofessionally, guarantee cannot be allowed
Mains supply cable
Lamp
Green
N
Blue
L
Brown
LED VANA WITH PIR SENSOR
Industrial lamp with PIR sensor
or
applies to maximum.
+
4
5
180˚
130°
60°
60˚
max. 8m
12m
0,5 - 3,5m
1,5 - 3m
All right reserved.
Technical data can be changed without previous notice.
6
UM_LEDVANAS_111020
Werbung
