Setting the time and date
You have to set the date and time first before you can use the
calendar and alarm functions.
Press the SETUP key. The Setup menu will appear.
Use the or arrow keys to select Date/time/alarm
setting and press ENTER.
Use / to select the setting you wish to change and
then press ENTER on the remote control or
on the viewer.
Use the or arrow keys to enter the required setting
and then press ENTER to confirm.
Proceed in the same way with the other settings until the time
and the date settings are correct.
Setting the alarm
Press the SETUP key. The Setup menu will appear.
Use the or arrow keys to select Date/time/alarm
setting and press ENTER.
Use the / keys to highlight the hour or the minute and
press ENTER in order to be able to change the alarm time
with the or arrow keys.
Highlight the time using the / keys and select one of
the following settings using the or keys:
Off:
The alarm function is deactivated.
Daily: The alarm will go off every day.
Once: The alarm will go off once.
Press ENTER to confirm.
The alarm setting is in the menu for the time/date
setting. Set the alarm time in the "Alarm" section of
the OSD.
EN
/ENTER
25