Hama 00049278 Bedienungsanleitung Seite 9

After Windows has fi nished booting, a window appears
with the title
options. Select the fi rst option
You are now asked by
want to continue the procedure. Click ->
After a short time, Windows displays a dialog box in which
you are asked to insert your driver CD-ROM. Follow the
request and then click ->
Windows now displays a message confi rming that the
drivers were successfully installed. Click ->
complete installation. Remove the driver CD-ROM from your
drive and keep it in a safe place so that the driver can be
reinstalled if required.
You can verify whether the controller has been successfully
installed by checking under
In some circumstances, you may be asked by the
for confi rmation. Click ->
The following entry must appear without a yellow
exclamation mark.
Silicon Image SiI 3512 SATARaid Controller
1. After booting, the
and asks you if it should connect to
select
2. In the next window, you are asked
. Select the option
continue.
3. Insert the enclosed driver CD-ROM into your drive.
4. Choose the option
and then click ->
Wizard searches the driver CD-ROM and then tells you
that the driver was installed successfully. Then click ->
.
You can check whether the controller was installed
successfully under
. The following entry should appear without a
yellow exclamation mark.
8
. It offers you three
whether you
.
. Wait until the
window is displayed.
to
appears
. Click -> to continue.
. Then click ->
. The Hardware
Silicon Image SiI 3512 SATARaid Controller
1. After booting, the
and asks you if it should connect to Windows Update;
select
2. In the next window, you are asked
continue.
3. Insert the enclosed driver CD-ROM into your drive.
4. Choose the option
and then click ->
Wizard searches the driver CD-ROM and then tells you
that the driver was installed successfully.
: Windows may inform you that the driver has not
passed Windows Logo testing, click
to install the driver.
You can check whether the controller was installed suc-
. cessfully under
The following entry should appear without a yellow
exclamation mark.
Silicon Image SiI 3512 SATARaid Controller
1. After booting, the
;
appears; click ->
2. In the next window, you are asked
to
3. Insert the enclosed driver CD-ROM into your drive.
Select only the
You can verify whether the controller has been successfully
installed by checking under ->
following entry should appear without a yellow exclamation
mark.
. Click ->
. Select the option
. Then click ->
. The Hardware
to continue the procedure.
. Select
and click ->
option. Then click ->
appears
.
to
.
The