Damage; Durasolid A - Duravit Air-System Bedienungsanleitung

Damage

> Remove scratches and other surface damage with the Duravit Acrylic Surface Main-
tenance and Repair Set (ID No. 790302 00 0 00 0000).

6.3 DuraSolid A

NoTIcE
> Do not use concentrated acids or alkalis (e.g. caustic soda/caustic potash/drain
cleaner).
> Avoid contact with acetone; rinse the tub with clean water immediately in case of
contact.
> Avoid contact with nail polishes, lipsticks and all hair dyes. Stains of this type can
only be removed by sanding.
> Do not use abrasive or hard sponges.
Failure to observe these instructions may damage the surface. Complaints due to im-
proper cleaning and care will not be covered by the warranty.
cleaning the tub
> Clean the surface with a soft damp cloth.
> Remove light soiling with warm water and some standard detergent or vinegar-/
lemon-based cleaning agent.
> Remove heavy soiling with a magic cleaning eraser, warm water and some standard
detergent or vinegar-/lemon-based cleaning agent.
? Soiling is still visible after cleaning?
> Remove the soiling with a soft cloth and some scouring agent.
? A silky gloss effect has emerged on the surface?
> Rub the treated area with a Scotch Brite sponge or 1000 grade super fine sandpa-
per to restore the matt appearance of the surface.
Rinsing and drying the tub
> Rinse the tub well with clean water after the treatment.
> Dry the tub with a soft cloth.
Damage to the product as a result of using the wrong cleaning
agent or cosmetics.
21