Transport; Transport Im Karton - Wasp DELTA 2040 Bedienungsanleitung

1.0 Transport

To transport the 3D printer only the method below can be used. Make sure the means of transport
and the lifting device can bear the weight of the machine with its packaging (about 25 Kg):
+ Transport in cardboard box.
WARNING
The staff in charge of handling must use protective gloves.
WARNING
While lifting or handling the 3D printer or any of its parts, clear the working area, by leaving
a sufficient safety area around it to avoid injuring people or damaging objects that could be
inside it.
WARNING
All the options ordered with the printer are packed separately or inserted in the same packaging.

1.1 TRANSPORT IM KARTON

The printer is inserted inside a cardboard box with the following
dimensions 51cm x 58cm x 100cm (see picture 1). In order
to avoid any movement of the printer, two casings made of
polyethylene foam are added inside the box to make the printer
more stable and to protect it from any impact.
The printer is covered inside by a cellophane tape. In some
cases for the delivery the strapping is needed. The box can
also be lifted manually (since the weight has a low value) but
at least by two people.
WARNING
Follow the directions on the packaging before handling and
opening it.
Seite 8
Bedienungsanleitung
Picture 1