Kemot URZ3472 Bedienungsanleitung Seite 8

FEATURES
• Device belongs to the group of energy efficient products.
• WARNING: Device may heat up to a higher temperature.
• Minimal distance of a light fixture (its light source) from the spots
and objects that it's illuminating - 0,5 m.
MOUNTING
Read the manual before mounting. Mounting should be performed
by an appropriately qualified person. Check for proper mechanical
fastening and connection to electrical power prior to first use.
1. Switch off the power source.
2. Remove the mounting bracket from the Led floodlight. Drill the
wall and screw the bracket onto the wall using suitable plastic
wall plugs and screws. Check that the bracket is securely fitted
on the wall.
Note: Do not at this stage re-attach the floodlight to the bracket.
3. Connect the power cords:
• brown wire of the floodlight with Live brown or red wire of the
electrical wiring;
• blue wire of the floodlight with Neutral blue or black wire of
the electrical wiring;
• yellow-green wire of the floodlight with earth wire of the
electrical wiring.
4. Re-attach the floodlight to the bracket and secure the cable
to the wall using suitable clips. Ensure that the cable is not
touching the body of the floodlight, and that there is sufficient
slack in the cable to allow the floodlight to be tilted and adjusted
as required, which should be done by grasping the metal body
of the floodlight, not its rear wiring box.
EN
8
Owner's manual