Belkin RK1003ek Anleitung

Einbaugehäuse zur wandmontage

Verfügbare Sprachen

Diese Anleitung herunterladen

RK1003ek INSTRUCTIONS

RK1003ek Product Inventory

Wall Mount Enclosure (1)

12-24 Screw (50)

Key (4)

Instructions

1. Use the template on the shipping box to locate your mounting holes.

2. Your wall mount has been designed to be reversible, allowing it to swing left or right.

3. Determine left or right swing requirement before hanging your wall mount.

4. Your RK1003ek is designed to use 1/4"(6mm) hardware, 16"(406mm) on center (wall mounting hardware

not included).

When installing your RK1003ek wall-mounted rack enclosure to materials such as wood, cinder block,

concrete, etc., consider the load capacity within the wall-mount structure, and be certain to check with

local authorities to determine the appropriate hardware requirements for these conditions. Because wall

compositions may vary at different installation sites, Belkin cannot warrant the fitness or suitability of any

installation instructions or installation hardware it may provide for wall-mount rack enclosures. Belkin hereby

DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MER

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SUFFICIENCY, FITNESS

OR SUITABILITY OF ANY INSTALLATION INSTRUCTIONS OR INSTALLATION HARDWARE BELKIN MAY PR

OVIDE FOR WALL-MOUNTED ENCLOSURES. Belkin recommends that an experienced maintenance and/or

technical person be consulted regarding the proper wall-mounting hardware and procedures to be used for the

anticipated load capacity of the wall-mounted rack enclosure.

Belkin Tech Support

Europe: 00 800 223 55 460

For other languages: www.belkin.com/support

RK1003ek Instructions

P35767ec

Seite 1 2. Your wall mount has been designed to be reversible, allowing it to swing left or right. 3. Determine left or right swing requirement before hanging your wall mount. 4. Your RK1003ek is designed to use 1/4”(6mm) hardware, 16”(406mm) on center (wall mounting hardware not included).
Seite 2 3. Stellen Sie vor der Montage der Wandhalterung fest, ob Sie die Schwenkrichtung nach links oder rechts benötigen. 4. Das Gehäuse RK1003ek ist für die Verwendung von 1/4”- (6mm) Montagematerial ausgelegt, 16” (406 mm) im Mittelteil (Befestigungszubehör für die Wandmontage nicht mitgeliefert).
Seite 3 3. Déterminez le sens de pivotement avant de poser le montage mural. 4. Votre enceinte RK1003ek est conçue pour utiliser du matériel de 1/4 po (6 mm), à 16 po (406 mm) dentre- axe (la quincaillerie du montage murale nest pas incluse).
Seite 4 +31 (0) 20 654 7349 fax +49 (0) 89 143405 100 fax +33 (0) 1 41 31 01 72 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. RK1003ek Instructions P35767ec...