Sapphire EDGE-HD4 Benutzerhandbuch Seite 5

To connect USB devices
Connect USB devices to the
USB ports found both at the
rear of the unit and under the
cover on the front of the unit.
To connect to the network
Connect the Ethernet cable
from your network switch /
router to the RJ45 LAN
connector found at the back of
the unit.
To connect the power
adapter
Connect the power connector
from the supplied power
supply to the DC – In
connector found on the rear of
the unit BEFORE attaching the
mains power cable to an AC
outlet.
To connect speakers or
headphones
Connect the 3.5mm audio
cable to the Audio Out jack
found at the rear of the unit.
To connect a microphone or
other audio source
Connect the 3.5mm audio
cable to the Line In jack found
at the rear of the unit.
- -
4
EDGE‐HD4 Mini PC
EN