Herunterladen Diese Seite drucken

Panlux SLV15HP/CH Gebrauchsanweisung Seite 3

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
MODEL:
SLV15HP/CH
ENG |
INSTRUCTIONS
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should be provided by
qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Rotation of sensors head: ±45° - horizontally,
0° - vertically
Material: aluminium, plastic
Location: interiors, exteriors
Notice
Before using, check the product and make sure that it is not damaged, otherwise do not use it. Before any manipulation
make sure that mains electrical supply is disconnected. In case of damage do not repair or disassemble the product. For
the best functional results, move toward the sensor (see to pic. 5). The incorrect function of the product can be caused by
interruption of electromagnetic field, small temperature difference between moving object and surroundings, reflection
(e.g. strong luminous source).
Infringement of any mentioned instruction can cause harm to health or property.
Installation
2
1
240mm
210mm
170mm
27
230V
14W
6000K
~50Hz
LED
Principle of sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor notices
the change and initiates trigger order „Light on" for adjusted time.
Reach (sensitivity) – SENS (max. 8m)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed with rotation of sensors head.
Time setting (switch-off delay) – TIME (10s (±5s) to 4min (±1min))
The countdown of adjusted time begins after last detected movement. We recommend setting the function on minimum
during functional test.
Twilight setting (response threshold) – LUX (cca 10~2000lx)
We recommend setting the function on minimum during test.
Stated information may differ according to position and installation height.
Position marked - or  applies to minimum and position marked
Warranty void if the product is mechanically damaged or connected unprofessionally.
3
Mains supply cable Lamp
L
N
TIME
1100
Ra
IP44
80
lm
4
5
Brown
Yellow - green
Blue
All right reserved.
Technical data can be changed without previous notice.
LED VANA S
LUX
SENS
0,730kg
C
3x1,5mm
or
applies to maximum.
+
6
max. 8m
12m
0,5 - 3,5m
1,5~3m
UM_LEDVANAS_140306
2

Werbung

loading