Yamaha PWK-242 Aufstellungsanweisungen Seite 6

Mounting the plasma monitor to the wall mounting unit
(1) Insert the hooked section on the top of the plasma monitor mounting bracket into the notch in the
top of the wall mounting unit and pull it down.
(2) Use 2 M6x18 screws inserted through the holes in the underside of the mounting bracket to
attach it firmly to the wall mounting unit.
(3) Check that the plasma monitor is firmly attached to the wall, then connect the cables.
Check that the
hooked section is
firmly seated in the
wall mounting unit.
Hooked section
Note
Connect speaker cables to the speaker terminals on the rear of the plasma
monitor prior to mounting it in the wall mounting unit. Connect the speaker
cables to the speakers after mounting the monitor in the mounting unit. For
instructions on attaching the speakers, refer to the speaker owner's manual.
Item specifications
Weight : 2.5 kg (5 lbs. 8 oz.)
Main construction material : Steel plate
Surface treatment : Black electrostatic painting
Angle adjustment: Vertical screen position
5
Notch
Plasma monitor
mounting bracket
Wall mounting unit
• Always use at least 2
people to carry the
plasma monitor.
• Remove all the cables
and cords from the
plasma monitor before
mounting it in the wall
mounting unit.
2 M6x18 screws