Component List - Yamaha PWK-242 Aufstellungsanweisungen

Thank you for purchasing the Wall Mounting Unit.
To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this
manual in a safe place for future reference.
This Wall Mounting Unit is for use only with the following models:
• PDM-4210
• PDM-4210E
■ All installation work must be performed by a qualified contractor or by dealer personnel.
■ The customer should never attempt to perform this installation work.
■ YAMAHA assumes absolutely no responsibility for injuries and damages that may occur due to
improper installation and handling.
• Before installing the wall mounting unit, please read these instructions and the plasma monitor user's
manual carefully to ensure installation is carried out correctly.
• After installation, please give the instructions to the customer for future reference.

Component list

1
Included in the component
Wall mounting unit
(A)
Plasma monitor
mounting bracket
M6x18 screws
Wall mounting unit
(B)
Wall mounting unit
(C)
bag
Flat washer for
x 10 M5–6 screws
x 8
Cable clamp
x 2