Operation - Rane TERMINAL 1010x Schnellstartanleitung

Operation

Important: Visit ranecommercial.com
Display
Home
To access the Home page, press the Home button at any time. The contents of the Home
page will change depending on the current state of Terminal 1010x. Information that may be
shown here includes booting status, fault status, network status, and more.
Menu
To access the menu, press the Menu button at any time.
To highlight the desired page, press the Page Left and Page Right buttons.
To enter the highlighted page, press the Select button.
The menu always contains the following pages:
•
Analog Input: This page shows this selected Input Mode and current Input Level for all
10 Inputs.
•
Analog Output: This page shows the Output Level and Mute Status for all 10 Outputs.
•
RAD: This page shows the Input Level, Output Level, Device Status, and Expected/
Unexpected Status. If you are locating a device, the square for that device will blink.
•
EXP: This page is divided into 32 regions, each representing 1 of 32 possible EXP
positions in the chain. One of the following 4 status icons will appear in regions with
connected devices in the configuration:
o Green: This icon indicates the connection is good.
o Yellow: This icon provides a warning for a missing connection.
o Yellow with Question Mark: This icon provides a warning for an unexpected status.
o Red with Slash: This icon indicates a problem, such as a wrong device connected.
If you are locating a device, the icon will blink.
Blank regions indicate an unused location that is not physically connected or in the
configuration.
With an optional Dante Expansion Card installed, 4 additional pages will be shown in the
menu: 1-16 TX, 17-32 TX, 1-16 RX, and 17-32 RX. These pages indicate if a channel is being
routed and its level.
8
to download the full Halogen User Guide.