Microphone Inputs - Rane TERMINAL 1010x Schnellstartanleitung

Setup
Terminal 1010x comes with a default configuration applied and ready to go. For more
templates, visit the Halogen Wizard, download a configuration and apply it to the Terminal
1010x for plug-and-play performance. If you're a Rane Certified Designer or collaborate with a
Rane Certified Company, please feel free to build your own design with Halogen software.
The default application in Terminal 1010x is: 4 stereo multi-source to 8 mono zones and 1
stereo zone with 2 dynamic microphones for master and local-announcement plus master web
remote for source selection and level control.
To use or test the default configuration, connect all Euroblock connectors with the Terminal
1010x turned off without the power cable. Make sure all cables are properly screwed inside
the Euroblock connectors and a power amplifier is placed in between the chain from the
Terminal 1010x to the speakers.
Follow the specification below for setting up Terminal 1010x with the default configuration.
MUSIC INPUTS
Connect Inputs 1-8 to balanced line level (+20 dBU) stereo audio sources, as follows:
Input 1: Music Source A Left
Input 2: Music Source A Right
Input 3: Music Source B Left
Input 4: Music Source B Right

MICROPHONE INPUTS

Connect dynamic microphones to Inputs 9 and 10 for local and master announcements,
respectively, as follows:
Input 9: Dynamic Microphone M1 for local announcement (overrides any other audio
input on all mono zone outputs 1–8)
Input 10: Dynamic Microphone M2 for master announcement (overrides any other audio
input—including the local announcement—on all outputs 1–10)
If you are using a microphone with an on/off switch, set the switch to on to begin the
announcement. If your microphone does not have an on/off switch, the dedicated Halogen
block called Voice Detect will detect when the microphone is in use and duck other audio
input. After your message has finished, the audio input will smoothly fade back in over 3
seconds.
4
Input 5: Music Source C Left
Input 6: Music Source C Right
Input 7: Music Source D Left
Input 8: Music Source D Right