Safety Notes - Monacor security IR-48LED Montageanleitung

GB Please unfold page 3. Then you can always see the ope-
rating elements and connections described.
1 Function Elements
1 Mains cable for the connection to a mains socket
(230 V~/50 Hz)
2 Light sensor; switches on the floodlight automatically, if
the brightness of the ambient light drops below 10 lux.
3 Vents
4 Mounting screws (2 replacement screws are included)
5 Bracket
6 Acrylic protection disc (caution: sensitive surface)

2 Safety Notes

This unit corresponds to the directive for electromagnetic
compatibility 89/336/EEC and the low voltage directive
73/23/EEC.
Attention!
The unit is supplied with hazardous mains voltage (230 V~).
Leave servicing to skilled personnel only. Inexpert handling
may cause an electric shock hazard. In any case the unit
must be repaired by skilled personnel.
Please observe the following items in any case:
For outside mounting a weatherproof mains connection is
compulsory. The connection must only be carried out by
authorized, skilled personnel.
The heat being generated in the unit is blown by a fan to the
outside. Therefore, the vents of the case must not be
covered with any objects.
Do not insert or drop anything into the vents! This could re-
sult in electric shock.
During operation the floodlight becomes very hot. Do not
touch the unit — danger of burning!
Do not place any objects near it — fire hazard!
Protect the floodlight against too much cold and heat (ad-
missible ambient temperature range -20 °C up to +60 °C).
Do not set the power supply unit into operation, and imme-
diately disconnect it from the mains voltage if:
8