Maintenance And Cleaning - jata hogar 995 Bedienungsanleitung

ASSEMBLING AND FUNCTIONING
• Slide the juicer set by the upper guide of the body (3) till the end.
• Place the handle (6) and screw the handle screw (7) till the end.
• Place the appliance in the edge of a table that allow you to turn the handle.
• Turn the lock knob (4) to the "BLOQUEAR" position, after that the appliance will be
fixed by the suction base (5) placed at the bottom of the appliance.
• Place under the juice guider (10) the juice cup with the sieve.
• Put an appropriate recipient under the end to collect the pulp.
• Insert the pieces of food and press with the pusher (1), at the same time turn the
handle (6)

MAINTENANCE AND CLEANING

ATTENTION
Before doing any operation you must put the knob (4) in the "LIBERAR" position, if not
the juicer set can not be removed.
• Remove the juicer squeezer (9) by turning the nut in the "OPEN" direction.
• To release the handle (6) unscrew the nut (7).
• Remove the shaft (8) and the tank.
• For a better cleaning you can remove the juicer squeezer (9) by turning anticlockwise.
• Once cleaned the accessories you can assemble them again.
• All the components except the body (3) may be cleaned with water and if necessary
you may use a liquid detergent.
• Never clean them in the dishwasher.
• Do not use chemical or abrasive products, such as metallic scourers, which may
deteriorate the surfaces of the appliance.
• The body of the appliance may be cleaned with a slightly dampened cloth.
• It is important to clean the appliance as soon as you have finished, to avoid the
pigments of some fruits or vegetables staining the plastic.
JH-995 Manual.indd 7
7
Mod. 995
05/08/14 10:20