Audio Physic High End-Serie Bedienungsanleitung Seite 16

Positioning the Loudspeakers
1. Once the loudspeakers are positioned parallel to the side walls, turn them inwards until an
imaginary line is pointing from the tweeter of each loudspeaker towards your preferred
listening position. If you prefer to listen to music alone, these imaginary lines coming from
the loudspeakers should 'intersect' at your listening position. This will result in excellent
localisation and spatial imaging. If you would rather listen to music in a group, turn the
loudspeakers further inwards so that the imaginary lines cross in front of the listening position.
2. If you prefer a wider soundstage and more generous spatial imaging, position the loudspeakers
at less of an angle so that the imaginary lines cross just behind the listening position. Once a
specific angle has been reached, the spatial image in the centre between the loudspeakers will
begin to lose structure and precision. You can easily identify the ideal angle by using a mono
recording. When the voice of the artist sounds clear again and comes directly from the middle
between the loudspeakers, you have found the ideal position.
You can find an abundance of further tips and tricks concerning setting up your speakers
and background information on the topic of listening in the technical area of our website at:
www.audiophysic.de
16
First step: Angle the loudspeakers so that
an imaginary line is in place between the
tweeters and your listening position.
Second step: Experiment with the angle.
When it comes to positioning your
loudspeakers, your listening taste plays an
important role. To find the ideal position,
mono recordings are extremely useful,
particularly those with a singing voice and
few instruments.