Denon Professional DN-700CB Benutzerhandbuch Seite 15

Power-On Play
If Power-On Play is active, the CD in the CD Slot or the USB Drive in the Front USB Port will start playing
as soon as CD or USB is selected as the audio source.
To activate or deactivate Power-On Play, press and hold the Power-On Play button. When activated,
P-OnPlay On will appear on the Display. When deactivated, P-OnPlay Off will appear on the Display.
Hot Start Mode
When the Number Buttons (0–9) are in Track Enter Mode, which is the default, they can be used only to
select tracks on a CD. However, in Hot Start Mode, you can assign a Hot Start Number to CD, USB, or
network drive tracks and then use the Number Buttons (0–9) to "hot start" playback of these tracks.
To assign a Hot Start Number to a track:
1. Select CD, USB, or NET as your audio source (as described in
that a CD is inserted into the CD slot or that a USB or network connected device with audio files is
properly connected to the unit.
2. Press and hold the Source button for three seconds to switch from Track Enter Mode to Hot Start
Mode. After switching to Hot Start Mode, the tracks currently assigned for hot start will be shown in a
list on the Display.
3. On the left side of each item in the list, see the Hot Start Number in two-digit format. This is the
number that you can enter with the Number Buttons (0–9) to initiate playback of the corresponding
track. In addition to the Hot Start Number, each item in the list will include the selected audio source,
track name, file type (e.g. MP3), and the time length of the track. If no track has been assigned to the
Hot Start Number, the Display will show the audio source and <Empty> in place of the track name.
4. To begin editing which track is assigned to a Hot Start Number, turn the Jog Dial to highlight one of
the items in the list and then press the Jog Dial.
5. In the new menu that appears, turn the Jog Dial to highlight and press it to select one of the following
options:
•
Automapping: Automatically assigns a Hot Number to as many as 99 tracks in the audio source's
tracklist.
•
Set: Assigns a track to the Hot Start Number in focus.
•
Remove: Removes the track from the Hot Start Number in focus.
•
Remove All: Removes all tracks from all Hot Start Numbers.
Once you are in Hot Start Mode and have assigned tracks to their Hot Start Numbers, enter a Hot Start
Number with the Number Buttons (0–9) to initiate playback of the assigned track. If the Hot Start Number
is two digits, press two Number Buttons (0–9) in succession (e.g. 1 then 2 to enter 12).
Selecting the Audio Source). Ensure
15