Denon Professional DN-700CB Benutzerhandbuch Seite 12

Selecting the Audio Source
To select the source of audio played by DN-700CB, press the Source button, which cycles through the
available options:
•
CD: audio CD (CD-DA, CD-ROM, WAV, MP3) or storage CD saved with audio files (CD-R) (see
Audio CDs and CD-Rs)
•
AUX: device connected to the Aux In (see
•
USB: USB device (mass storage class) (see
•
NET: device connected to the network via the Ethernet Port (see
Connected Device)
•
BT: Bluetooth device (see
Alternatively, you can select the audio source by pressing the corresponding button on the remote control.
Playing Audio CDs and CD-Rs
To play an audio CD or audio files on a CD-R:
1. If the unit is off, press the Power button to power it on.
Important: Do not insert a disc when the power is off. Doing so may damage the unit.
2. Insert the disc into the CD slot. Hold the edges of the disc without touching the recorded surface. Be
careful not to trap your fingers when the disc is drawn into the unit.
3. Select CD as the audio source (as described in
4. Use the Jog Dial and/or Number buttons (0–9) to select a track.
5. Press the Play/Pause (
Playing Audio from an Auxiliary Device
To play audio on an auxiliary device (e.g. smartphone, computer, portable music player, etc.)
connected to the Aux In:
1. If the unit is off, press the Power button to power it on.
2. Use a standard 1/8" (3.5 mm) cable to connect the Aux In to the corresponding output of your
auxiliary device.
3. Select Aux as the audio source (as described in
connected, AUX Connected will appear on the Display. If it is not connected, AUX Disconnected will
appear on the Display.
4. Use your auxiliary device to initiate playback, change tracks, etc.
Important: When AUX is selected as the audio source, all buttons except for Power, Source, and Eject
will be disabled on DN-700CB.
12
Playing Audio from an Auxiliary
Playing Audio Files on a USB
Playing Audio from a Bluetooth
) button on the unit or remote to initiate playback of the selected track.
Playing Audio Files on a Network
Device)
Selecting the Audio
Selecting the Audio
Device)
Drive)
Source).
Source). If your device is
Playing