Overview Of Parts; Putting Into Operation - Clatronic KRC 544 Bedienungsanleitung

Unterbauradio mit led-uhr

Vorschau ausblenden

Inhalt

Seite von 38

/ 38
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

5....-05-KRC 544 (I_ CZ)

•

First use the four screws to attach the mounting plate which is on top of the

device and which is released from the fixing device by pressing strongly

towards the rear.

•

Attention! If other screws are to be used because the wall is not thick enough,

these screws may break through the cabinet in certain circumstances!

•

Now insert the radio into the assembly plate mounting plate (four hooks) and

press it to the rear until it locks in place.

1. Station scale

2. Function button

- alarm time (ALARM)

3. Function button

- set time (TIME)

4. Function selector switch

(OFF/TIMER/ON)

5. Hours button (HOUR)

6. Minutes button (MIN)

Inserting the power reserve batteries

If there is a power cut or the mains plug has been removed from the power socket,

the settings will be retained if the power reserve batteries are inserted.

•

Open the lid of the battery compartment (14) on top of the device.

•

Insert 1 block battery of type 6 LR 61 AM6 or C. Ensure the correct polarity. If

the machine is not used for a prolonged period, please remove the batteries in

order to avoid "leakage".

Please do not dispose of used batteries in the normal domestic waste.

Old batteries should be returned for environmentally-friendly disposal.

1. Insert the plug into a properly installed 230 V, 50 Hz earthed socket.

2. Push the RADIO ON/OFF/AUTO switch (7) to ON.

3. By turning the TUNING knob (9), the desired radio station can be selected. The

tuned radio station will be displayed on the tuning scale (1).

4. The volume can be adjusted with the BUZZER/VOLUME knob (10).

5. In order to switch off the device, move the RADIO ON/OFF/AUTO switch to

OFF. The display indicates furthermore the current opposed time.

09.12.2002 12:50 Uhr