Removing The Control Handle - Renson Oxyvent Montageanleitung

1 • Removing the control handle
1
Make sure the internal flap of the Oxyvent
2
Slide the dismantling tool completely under the control handle.
3
Pull the control handle slightly downwards (a), using the dismantling tool, to by-pass the
difference in height between flap and interior profile and push simultaneously the control
handle off the black control plate (b).
4
Unscrew the black control plate, situated under the control handle.
is closed.
®
Notice :
Slide very carefully to avoid
damaging the profiles.
Oxyvent en
®
15