Operation - REV JY-168 Montage- Und Bedienungsanleitung

Operation

Transmitter
The transmitter (B) can be operated with battery (15) if it is
needed as a portable unit. For longer operation, however, the
external AC-DC adapter (14) is recommended. The transmitter
is equipped with a belt clip (9) so that you can clamp it on a belt
or install it on the wall. Put the transmitter at a convenient place
that should be between 1 and 2 metres away from the baby, for
optimum sound detection. Babyphone is switched-on via the
channel selection switch (10). Select one channel (A or B). The
active channel on the transmitter and receiver must be identical.
The status display (13) must now be lighted. With the help of the
VOX sensitivity control (12), you can carry out fine adjustment
for speech recognition. This establishes the minimum volume as
from which the sound will be transmitted. In order for the
receiver to be able to transmit even faint noises, you must rotate
the VOX sensitivity control in "+" direction.
Receiver
The receiver (A) can be operated with batteries (8) or via
external AC-DC adapter (7). However, for longer operation the
external AC -DC adapter (7) is recommended. The receiver is
provided with a belt clip (1) so that you can carry it on the belt.
The receiver can also be fixed on the wall by means of this belt
clip. Babyphone is switched on via the channel selection switch
(2). Select the same channel that you have already set on the
transmitter. The active channel on the transmitter and receiver
must be identical. The status display (5) must now be lighted.
Rotate the volume control (4) and set it according to your
requirements. On the receiver is an LED display (6) that
indicates the intensity of the volume. The stronger the sound is
received - the more the lights get lighted.
12