Herunterladen Inhalt Inhalt Diese Seite drucken

Charging Function; Dimmer Function; Time Projection Function; Volume Control - THOMSON CL300P Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 47

Charging function

1. Simply use the USB cable (not included) to charge the digital product. One end of the USB cable
connects to the "5 V USB OUT PORT" of the unit, another end connects to the digital product with
a converted tip or charging cable. It will start to charge.
2. When the digital product is fully charged, disconnect your digital product from the unit.

Dimmer function

Press the SNOOZE/DIMMER button repeatedly to adjust the LED display brightness as desired.

Time projection function

• Press the PROJ. BUTTON to turn on the projector and start displaying the time one of the room's
surfaces (wall or ceiling).
• To turn off the projector, press the PROJ. button again.
• Rotate the KNOB to find the best projection angle

VOLUME CONTROL

• Adjust the volume by pressing the VOL+/AL1 or VOL -/AL2 button

AUX INPUT JACK

1. Connect the external audio device or iPod by an audio connection cable with a 3.5mm stereo plug
on both ends (cable not included).
2. Insert one end into the AUX jack on the rear of unit. Insert the other end into the phone's jack.
3. Press the POWER button to turn on the unit.
4. Press the MODE button repeatedly until "AUX" appears on the display. Play the music in the
connected external audio device or iPod as usual.
5. When you have finished listening, press the POWER button to turn off the unit.

HEADPHONE JACK

• This unit will accept stereo headphones (not included) with a Ф 3.5mm plug. Before connecting the
headphones, set the volume to minimum level so as not to damage your ears or the headphones.
• Connect the headphones to the headphones jack. The unit's speakers will be automatically
disconnected.
Warning: Prolonged exposure to high sound levels may permanently damage your hearing. You may
not hear some warning sounds while wearing these headphones.

WARNING! Risk of hearing impairment

• Set a low volume on the playback device before connecting the headphones to the
sound source.
• Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
- EN 7 -

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis