Lisa alarmo Bedienungsanleitung Seite 9

Congratulations on the purchase of your RF
lisa alarm monitor »alarmo«.
You have chosen a highly modern and relia-
ble transmitter for the wireless RF lisa home
signalling system.
Please read this manual thoroughly to be
able to set up the unit correctly and to fa-
miliarise yourself with all of the features the
system offers.
Package contents
Please check if all of the following compo-
nents are included:
- »alarmo«
- rechargeable battery (in the compartment)
- 12 V power supply unit
- manual
- warranty card
Should any parts be missing, please imme-
diately contact your dealer or the manufac-
turer directly.
Function
»alarmo« has been conceived to enable
the easy incorporation of already existing
smoke detectors into the RF lisa-signalling
system, without need for modification or wi-
ring.
»alarmo« scans environmental noises
in proximity for sound patterns typical of
smoke detectors and fire alarm systems of
any type.
False alarms, possibly caused by alarm
sounds not actually within in the room (e. g.
passing emergency vehicles, TV and movie
sound effects) are prevented by means of
intelligent analysis and filtering of the regis-
tered sound.
If an alarm sound is identified as such,
»alarmo« transmits a radio signal to all
RF lisa receivers within range, which will
indicate the incident with light, vibration or
sound - depending on the type of receiver.
Controls
Battery status indicator
A red illuminated battery status indicator
means that the inserted rechargeable bat-
tery is almost depleted. The battery needs
to be recharged.
A permanent green light indicates a char-
ged battery and an operational »alarmo«.
Transmission status / momentary indi-
cator
The transmission status indicator lights up
when a radio signal is sent to the lisa-recei-
vers.
Signal key
This button is intended to check if the sys-
tem is working correctly, even when no
acoustic alarm is picked up. Function and
signal range can be verified by pressing this
button.
lisa-Channel selector
You can select the radio channel using the
channel selector. Make sure all devices in
your system are set to the same channel.
Note (special accessories)
»alarmo« is able to trigger various indicator
modules, e. g. you can have a light flash di-
rectly released by the »alarmo«.
The following modules (not included) can
be plugged into to the AUX output connec-
tors:
- Vibrating pillow
- Flash module MF-1
- Switch module MS-1
- Acustic module MA-1 (A-3340-0)
(A-3303-0)
(A-3320-0)
(A-3330-0)
English 9