Operation - Pronomic XL-12M1 Bedienungsanleitung

Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no
user-servicable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified service personnel.
Water warning:
• Do not expose the device to rain, use it near water or in damp or wet conditions on it containing liquids which might
spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or
if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the
electric plug from the outlet, and have the device inspected by qualified service personnel.

Operation

Installation
Place the speaker on a solid flat surface (ground, etc.). Make sure, that the speaker
doesn't fall over.
Power connection and wiring
Please connect the power cable to 220(230) V/AC 50/60Hz power voltage. Make sure that
net voltage is according to technical data. Connect all input/output signals with Chinch
and/or 6.35mm jack cables. Do not connect multiple inputs possibilities (e.g. Chinch /
6.35mm) with more than one cable.
After you finished all audio connections set master volume to "0". Switch on audio source
and speaker power. Increase slowly master volume to comfortable level.
E
N
G
L
I
S
H
8