Linksys Instant Broadband BEFDSR41W Benutzerhandbuch Seite 11

b. WAN IP Address: Static IP Address
If your ISP says that you are connecting through a static or fixed IP address
supplied by your ISP, perform these steps:
1. Select RFC 14583 Bridged.
2. Select Static IP Address as the WAN IP Address.
3. Enter the IP Address.
4. Enter the Default Gateway Address.
5. Enter the DNS in the 1 and/or 2 fields. You must enter at least one DNS
address.
6. Click the Apply and then the Continue buttons to save the settings.
D
2
18
Downloaded from www.Manualslib.com
Instant Broadband ™
manuals search engine
Series ADSL Gateway
2. RFC 1483 Routed
If your ISP says that you are connecting through RFC 1483 Routed, perform
these steps:
a. Select RFC 1483 Routed.
b. Enter the IP Address.
c. Enter the DNS in the 1 and/or 2 fields. You must enter at least one DNS
address.
d. Click the Apply and then the Continue buttons to save the settings.
D
3
with Modem / Router / 4-Port Switch / Wireless-Ready
19