ManyTronic NANO-STARS series Betriebsanleitung Seite 26

Figure 2: Base Mounting
•
Remove the 3 Allen screws in the bottom of the Holder
•
Remove the base by pulling out and using the supplied Mounting
accessories for fixing.
•
Put the foot on the base.
•
Turn the base in the desired direction of projection
•
Fixing the base by tightening the 3 Allen screws.
Figure 2: Adjusting the Projected Image
You can adjust the projection field of the laser by turning the aperture ring.
STAR-PROJECTOR NANO-STARS - Riko
Seite | 22