General Information; Safety Instructions; Other Symbols In This Documentation; Units Of Measurement - AEG Haustechnik EWH 50 Trend Bedienung Und Installation

Operation - for users and contractors
oPerAtion

1. General information

The chapters "Operation" and "Special Information" are
intended for both the user and qualified contractors.
The chapter "Installation" is intended for qualified con-
tractors.
note
Read these instructions carefully before using the
appliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Safety instructions

1.1.1 Structure of safety instructions
KEYWORD Type of risk
!
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
» Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
symbol Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
Keyword Meaning
DANGER Failure to observe this information will result in seri-
ous injury or death.
WARNING Failure to observe this information may result in seri-
ous injury or death.
CAUTION Failure to observe this information may result in
non-serious or minor injury.

1.2 Other symbols in this documentation

note
General information is identified by the symbol
shown on the left.
» Read these texts carefully.
symbol Meaning
Material losses
!
(appliance and consequential losses, environmental
pollution)
Appliance disposal
» This symbol indicates that you have to do something.
The action you need to take is described step by
step.

1.3 Units of measurement

note
All measurements are given in mm unless stated
otherwise.
14

2. Safety

2.1 Intended use

The appliance is intended for heating domestic hot water
and can supply one or more draw-off points.
This appliance is intended for domestic use. It can be
used safely by untrained persons. The appliance can also
be used in a non-domestic environment, e.g. in a small
business, as long as it is used in the same way.
Any other use beyond that described shall be deemed
inappropriate. Using the appliance for heating fluids other
than water or water supplemented with chemicals, such
as brine, is also deemed inappropriate.
Observation of these instructions and of instructions for
any accessories used is also part of the correct use of
this appliance.
2.2 General safety instructions
wArning Burns
During operation, the tap and safety valve can reach
temperatures in excess of 60 °C.
There is a risk of scalding at outlet temperatures in
excess of 43 °C.
wArning injury
!
The appliance may be used by children aged 8 and
up and persons with reduced physical, sensory or
mental capabilities or a lack of experience and know-
how provided that they are supervised or they have
been instructed on how to use the appliance safely
and have understood the resulting risks. Children
must never play with the appliance. Children must
never clean the appliance or perform user mainte-
nance unless they are supervised.
Material losses
!
The user should protect the water lines and the safe-
ty valve from frost.
note
The appliance is under pressure. During the heat-up
process, expansion water will drip from the safety
valve.
» If water continues to drip when heating is com-
pleted, please inform your qualified contractor.
2.3 CE designation
The CE designation shows that the appliance meets all
essential requirements according to the:
◦ Electromagnetic Compatibility Directive
◦ Low Voltage Directive
2.4 test symbols
See type plate on the appliance.