Using The Magnifier - Levenhuk DTX 43 Bedienungsanleitung

Reading with the magnifier
To read with the magnifier, operate as the following:
1. Turn on the unit by pressing the Power ON/OFF switch 10 located on side.
2. Pull out the foot of the magnifier until it sits at its maximum range.
3. Place the magnifier flat against the text you want to read.
4. Slide the unit gradually to the right to read to the end of the line. Slide the unit down and back to the left to read the next line of
text.
5. To change the level of magnification, press the Magnify button.
6. To change the colors used on the screen, press the Color Mode button until you find the mode best suited for your vision
needs.

Using the magnifier

Color Mode selection
Press the Color Mode button to cycle through the magnifier's 7 different color modes as follows: full color, black on white, white
on black, blue on white, blue on yellow, yellow on black, yellow on blue.
Magnification adjustment
Press the Magnify button to cycle through the four level of magnifications: 6x, 8x, 10x or 14x.
Freeze image
Press the Forward/Freeze button to switch between freezing and unfreezing the current image.
Capture photo
Load a MicroSD card (not included) into the MicroSD card slot. Press the snapshot capture button to capture a photo. The
captured photos will be automatically stored in the MicroSD card.
Playback
Press the Playback button to view captured photos. Press the Forward button or the Backward button to move forth or back.
Press the Playback button again will return the magnifier to reading mode.
Delete
Press the Playback button to view captured images. Press the Capture/Delete button to delete an image.
Download captured pictures to a PC
Connect the magnifier to a PC using a standard miniUSB cable. Plug the miniUSB connector of the cable into the miniUSB port on
the side of the magnifier, then plug the standard USB connector of the cable into the PC. Turn the power on. You can now
download the captured pictures to the PC.
Output to monitor with TV-in
Connect the magnifier with monitor with TV-in by TV video cable, turn the power on and then you can see live video on the
monitor.
3