Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. The setting order is: time zone offset, 12/24-hr
format, hour, minute, year, day / month format,
month, day and language.
NOTE Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
NOTE The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
To select display mode:
Press CLOCK to choose between clock with seconds
and clock with weekday.
ALARM
To set the alarm:
1. Press and hold ALARM for 2 seconds to enter
alarm-setting mode.
2. Press
/
to set hour / minute.
3. Press ALARM to confi rm.
To toggle alarms ON / OFF:
1. Press ALARM to display alarm time.
2. Press ALARM again to turn alarm ON / OFF.
To silence the alarms:
•
Press SNOOZE to silence it for 8 minutes
OR
•
Press any other key to turn the alarm off and activate
it again after 24 hours.
indicates alarm is ON.
5
TEMPERATURE
To toggle temperature unit:
Press °C / °F.
To toggle between outdoor / indoor sensor readings:
Press TEMP.
/
indicates indoor and outdoor
temperature.
To auto-scan between sensors:
Press and hold TEMP for 2 seconds to display the
sensor's data for 5 seconds.
To deactivate auto-scan function press TEMP.
PROJECTOR AND BACKLIGHT
To activate Projection function:
•
Slide PROJECTION switch to ON to illuminate
projection continuously.
To activate Backlight function:
•
Slide LIGHT switch to ON to illuminate backlight
continuously.
OR
•
Press SNOOZE to turn on projector and backlight
for 5 seconds.
•
Press repeatedly to fl ip dual line projection image
by 180 degrees.
NOTE If projection is illuminated, do not look directly
into the projector.
Werbung
Kapitel
