How To Use - Taylor Swoden 8719138900022 Bedienungsanleitung

GB
Kettle model
8719138900022 220-240V~ 50/60Hz 1850-2200W
8719138900039 220-240V~ 50/60Hz 1850-2200W

How to use

For the first time to use or no use for a long time, it is
recommended that you fill to the maximum level mark with
fresh tap water, boil and empty the kettle at least 2 times to
clear kettle of any tiny particles. Do not drink such water.
2.Remove the kettle from the base to the filling place. Fill the
kettle with desired amount (no less than the minimum and no
back on the base unit.
3.Connect the plug into a power outlet(220-240V,AC), switch
the kettle on by pressing the switch. The light will illuminate to
indicate the kettle is heating.
4.The kettle will automatically switch off once the water has
boiled and the neon light goes off.
5.Lift the kettle from the base, and you can pour out the water
into container.
5
CLEANING
●
in the kettle regularly.
● Always unplug from the plug socket and allow to cool down
before cleaning.
● Do not use chemical, steel wool, or abrasive cleaners to
clean the outside of the kettle, as these will scratch the surface
and fade the outside color.
1.Fill the kettle with 0.5L white vinegar and water and allow to
stand for over 1 hours.
2.Empty the solution from the kettle. Wipe off the deposits
remained with damp.
3.Fill the kettle with clean water, bring to boil and then discard
the water. Repeat and the kettle will be ready to use.
4.If necessary, repeat the operations above for several times.
5.Do not immerse into water. The surface of the kettle may be
wiped over with a damp cloth and polished with a soft dry
cloth.
GB
WARRANTY: 2 YEARS
6