Cleaning And Maintenance - Beem Miracle Mop 10 in 1 Bedienungsanleitung

EN
Angled adapter
Use the angled adapter to clean corners
and locations that are difficult to access.
Flat scraper
Use the flat scraper for cleaning hard sur-
faces.
Window attachment
Wipe the glass surface from top to bot-
‹
tom with the rubber lip.
Wipe the rubber lip and the lower edge
‹
of the window dry with a cloth after
each row.
Floor brushes
The floor brush is suitable for cleaning large
washable wall and floor coverings. It can be
used with or without a cloth.
Move the floor brush rapidly back and forth
after discharging the steam. To clean joints
properly, move the floor brush diagonally to
the joint.
Rinse the microfibre cloth or the coral cloth
at regular intervals to improve absorption
of dirt.
BEEM - Elements of Lifestyle
Miracle Mop 10 in 1
UV lamp
The underside of the floor brush is
equipped with a UV lamp (18) in order to kill
germs during cleaning.
Press the ON/OFF switch (2) on the
‹
top of the floor brush to switch on the
UV lamp. The red indicator lamp lights
up. You can see in the inspection win-
dow (15) that the UV lamp is switched
on.
NOTE
► A safety switch (17) is located on
the underside of the floor brush. It
ensures that the UV lamp can only
be activated when the floor brush is
standing on the floor.
To switch off the UV lamp, press the
‹
ON/OFF switch again.

Cleaning and maintenance

Before beginning any work, pay attention to
the safety instructions in the section Safety
instructions (page 17)!
■ Use a slightly moist cloth to wipe off the
outside of the appliance housing and
the accessory parts.
■ The microfibre cloths can be washed at
40 °C in the washing machine. In order
to allow the cloths to properly absorb
the dirt, do not use fabric softeners. Do
not dry the cloths in the tumble drier.
25