Herunterladen Inhalt Inhalt Diese Seite drucken

Getting To Know Your Camcorder; Contents Of The Packaging; Charging The Batteries - LEXIBOOK DJA200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 78
18
DJA200_01IM1264_26Jun_V02.indb 18

GETTING TO KNOW YOUR CAMCORDER

Key guide
Please refer to image A:
1. Micro SD card slot
2. Mini USB jack
3. Power button
4. Busy LED indicator
5. Power LED indicator
6. Speaker
7. Shutter button
8. LCD touch screen
Please refer to image B:
9. Reset hole
10. AV out jack
11. HDMI jack
12. Helmet/Bike mount
tripod hole

CONTENTS OF THE PACKAGING

Unpacking the device
When unpacking, ensure that the following elements are included:
1 x DJA200_01 digital camcorder / 1 x USB cable /
1 x waterproof case / 1 x helmet mount / 1 x bike mount /
2 x stickers / 1 x CD-ROM / 1 x hand strap / 1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire
ties and tags are not part of this product and should be discarded.

CHARGING THE BATTERIES

Note: Before using the camcorder for the first time, please remove the
protective film of the camcorder's LCD screen.
To recharge the internal lithium battery (700mAh), proceed as follows:
1. Make sure the camcorder is off.
2. Open the rubber cover that protects the mini USB jack.
3. Connect the USB cable to the camcorder (5 pin) and your computer
(4 pin). The power LED indicator (5) lights up red when the batteries
are charging and turns off when it is fully charged. It is normal for the
camcorder to be warm during charging.
Note: When the low battery icon
recharge the batteries.
13. Microphone
14. Lens
15. Door clip
16. Waterproof buttons
17. Waterproof case
Please refer to image C:
18. Bike mount
19. Screws (tighten clamp)
20. Screw (adjusts camcorder position)
21. Camcorder mount tripod screw
22. Clamp
23. Connectors
24. Helmet mount
25. Strap
26. Camcorder mount tripod screw
27. Screw (adjusts camcorder position)
appears on the LCD screen,
WARNING
frequency
function o
Press and
When you
illuminates
ready for u
Press the
melody wi
Note: To s
period of i
(3) to reac
time by se
To store p
included)
To insert
1. Turn off
2. Open th
3. Insert th
push firml
4. Turn the
5. To remo
Notes:
• Always t
SD card.
• To save
card that h
26/06/2014 1:56 PM

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis