Charging The Battery - Sennheiser Set 810 S Bedienungsanleitung

Charging the battery

Place the receiver into the transmitter's
charging compartment, with the operating
control at the front. Pull the 3.5 mm stereo
plug out of the receiver to turn the receiv-
er off. The left LED on the transmitter
must light up.
Charge the battery for 24 hours before
you use it for the first time. The normal
charging time is 4-5 hours. A fully char-
ged battery has an operating time of ap-
prox. 4 hours. When charging a spare
battery in the small charging compart-
ment at the right of the transmitter, charging time is 10-12 hours.
SET 810 S 9