Siemens SITRANS AW200 Kompaktbetriebsanleitung Seite 13

– Of plastic surfaces (e.g. enclosure, sensor element, special coating,
supplementary labels, ...)
– Of isolated capacitances (e.g. isolated metallic labels)
● Drained battery packs must be disposed of in an environmentally-appropriate
manner.
● Observe the national waste disposal laws.
Installation
● Avoid electrostatic charging (e.g. do not rub dry):
– Of enclosure and antenna
– Of connecting cable
– Of special version with pushbuttons (if present)
● If electrostatic charging is avoided (e.g. through friction, cleaning, maintenance,
high flow of process medium): WirelessHART adapter can be used in gas groups
IIC and IIB.
● WirelessHART adapter: label with warning "Avoid electrostatic charging".
● Observe the directives for connecting intrinsically-safe circuits.
● To retain the degree of protection of the enclosure:
– Screw the cover tight.
– Mount the cable entry appropriately.
● Following alignment of the enclosure (rotating): tighten the locking screw again.
● Protect the connecting cable between the WirelessHART adapter and the field
device against tension and friction (e.g. electrostatic charging resulting from flow
of process medium).
WirelessHART Adapter SITRANS AW200
A5E02777167-04, 03/2016
Direct installation on the
field device
General safety instructions
Remote installation with
cable connection
13