Werbung
1 Product Diagram
1.1 Back side Buttons
1. Power
2. Menu
3. OK
4. Right/Down
5. Left/Up
6. Return
1.2 Bottom of the frame
1.SD /MMC/ SDHC/MS
2.USB
3. DC IN
2. Getting Started
2.1 Put the digital photo frame with installing bracket on a flat position stability,
then plug one end of the AC adapter into a standard 110-240V AC
electrical outlet and the other end into the DC IN slot on the frame.
Note: The bracket installing and standing method refer to "Stand Instruction".
2.2 Remove the protective film covering on the LCD.
2.3 When insert the plug, press the power button on the Unit to power On/Off.
Werbung
