TUNNEL STATION
Inside the tunnel (standard)
W
Open the back cover and clean the inside of the tunnel with
PRETREATcleaner and a cloth, remove any coating and dust
deposits. Close the back cover again.t
Fan filter on the topt
W
Unscrew the safety screws and remove the filter. It is best to
clean the filter with a high-pressure cleaner, replace if neces-
sary if it is too dirty. Also clean the inside of the filter holder
with PRETREATcleaner and a cloth. Replace the filter and close
the safety screws.
Outside cleaning (dripping liquid)
W
Remove any coating waste with PRETREATcleaner and a cloth
I
III
I
III
I
III
EN
II
II
IV
II
19