Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instruction
Warning:
Always wear safety glasses when operating hand
tool.
Instructions:
Turn tension adjustment knob until desired tension
setting is displayed in tension indicator window.
Space between numbers counts as one-half setting.
See step 6.
Extend handle open to release gripping mechanism
and insert clamp tail into tool through front load entry.
Squeeze handle repeatedly to tighten band around
object. Be sure to release handle completely to use
full pull-up stroke of tool. Buckle must be secure
against the tool head and nestled between the two
retention clips. Once the preset tension has been
reached, the handle will no longer release completely.
To cut-off excess clamp tail, squeeze handle out until
it snaps into place, the tool will be ready to apply the
next clamp.
Tension Setting Range:
.250 Smooth I.D. Tie-Lok 0 - 8
9
© HILPRESS GmbH Hamburg
Tension
Adjustment
Knob
Tension
Indicator
Window
Handle
Werbung
