GEP Trident 150 Bedienungsanleitung Seite 14

Filter maintenance / cleaning
Removal of filter grid
Return filter grid
•
•
•
Cleaning of the filter grid
1.
2.
- this removes the fats and any oil layers.
- Clean the remaining dirt particles with a powerfull water jet.
Dont use a metal brush!!
3.
Comment:
When the filter grid is removed from the filter housing. The Trident tank filter will
function as a filling device, without filtering.
Malfunction solver
What can you do when...
The specified efficiency is no longer met?
The filter grid filled with dirt particles or has not been cleaned for a long time.
Clean the filter grid according to the instructions.
The filter grid is not placed properly.
Place the filter grid according to the instructions.
If you have any other malfunctions, please contact your dealer.
Removal/ Recycling/ Destruction
The wrapping material can be processed with old paper. The filter grid should be
processed by scrap metal handlers. The housing of the filter is 100% recyclable.
© GEP www.regenwater.com
• Remove the top cover of the filter housing
• Remove the filter grid by the removable handle
Place the fitler grid with the handle at the outlet side of the filter housing
The filter grid should be resting on the bottom of the inlet and outlet
Place the top cover back on the filter housing
Remove the filter grid.
Rub the filtergrid with dish soap and let it soak for 5 minutes.
Place the filter grid back in the filter housing.
www.gep-rainwater.com Tel. NL +31 (0)183 610520 BE +32 (0)56/299.701 info@regenwater.com