Profim SYNCHRO MyTurn Bedienungsanleitung Seite 10

C
Angle of the backrest and the seat
u
Adjustment of the angle of the backrest
and the seat:
1. Start the SYNCHRO mechanism by turning
the lever upwards. Synchronous reclining
of the seat with the backrest is possible
with the lever in upper position.
2. Lean against the backrest until it reaches
definite inclination.
3. Turn the lever down to adjust the backrest
into desired position.
NOTE!!!
The SYNCHRO mechanisms used in Profim
products are additionally equipped
with ANTI-SHOCK-system after releasing
the mechanism, the back does not hit
the sitting person, but remains
in the previous position.
The SYNCHRO mechanism
is activated only when the person
leans on the backrest again.
10
Operating instruction for the SYNCHRO Mechanism
C