Operation; Cleaning And Maintenance - Waeco MyFridge MF05M Bedienungsanleitung

MyFridge MF05M, MF1M
6

Operation

A
NOTICE!
 When using the milk cooler, also see the instructions in the customer docu-
mentation of your coffee maker.
 Only use the milk glass supplied for cooling milk. Replacement glasses can
be ordered stating item number T0 63 (MF-05M) or T0 82 (MF-1M).
I
NOTE
 Before starting your new device for the first time, you should clean it inside
and outside with a damp cloth for hygienic reasons (please also refer to the
chapter "Cleaning and maintenance" on page 13).
 If the device malfunctions (e.g. due to electrostatic discharge) you only need
to press a function button for the device to function normally again.
6.1 Cooling milk
➤ Fill the glass with milk and screw the lid with the milk tube onto the glass.
➤ Place the milk glass in the cooler.
➤ Connect the milk tube on the cooler to the supply line of your coffee maker.
➤ Connect the appliance via the mains adapter to a power source and press the
"ON/OFF" button (fig. 2 A1, page 3).
✓ The status indicator (fig. 2 A2, page 3) lights up and the device starts cooling.
➤ To end cooling. press the "ON/OFF" button (fig. 2 A1, page 3).
➤ To switch off the device, pull out the connecting cable.
7

Cleaning and maintenance

A
NOTICE!
 Before cleaning the device, pull the cable out of the socket.
 Also see the cleaning instructions in the customer documentation of your
coffee maker.
 Never clean the device under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
I
NOTE
The milk glass (without the lid) is suitable for dishwashers.
➤ Clean the inside of the device with a damp cloth now and again.
➤ Wipe the outside with a damp cloth.
➤ Clean the lid and the milk tube occasionally with a standard cappuccino cleaner.
EN
Operation
13