Front View - Sweex Pp050 Benutzerhandbuch

English version
Front view
The front of the Sweex Manageable UPS features 3 LEDs and a button.
• The blue LED indicates that the mains power supply is ok.
• The orange LED indicates that the UPS is charging.
• The red LED is lit in the event of a power failure. The UPS now supplies power to all devices connected to it.
• The button underneath the LEDs is the power switch.
Charging the Sweex Manageable UPS
The UPS starts charging once connected to the mains network. The orange LED will be lit. The UPS will also charge when switched on via the power switch.
Setting the Sweex Manageable UPS
The UPS setting can be adjusted via RUPS 2000. The icon to start RUPS 2000 is located in the bottom right of your screen.
Double-click this icon with your left mouse button or click it once with your right mouse button and select "Open RUPS Manager".
A window of the RUPS 2000 programme appears.
A full description of these settings can be found on the Sweex CD-ROM.
Note: when starting the RUPS 2000 programme prompts the message "Connection Error", check the serial cable connection, restart the computer
and try again.
Warranty
All products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or
(rechargeable) batteries included. Settlement of guarantee only takes place via the dealer where you have purchased the product in question.
The rightful owner has and retains title to all brand names and related rights mentioned in this manual.