Setting The Temperature - Bosch Sensixx’x TDi90 Gebrauchsanleitung

45º
16
BO S C H
3 Fill the water tank. Never ill beyond the level mark for
maximum illing (9)!
4 Close the water inlet lid.
Tip: To prolong the optimum steam function, you may mix tap
water with distilled or demineralised water 1:1. If the tap water in
your area is very hard, mix tap water with distilled or
demineralised water 1:2.
ºC
2. Heating
Remove any labels or protective covering from the
soleplate (10).
Plug in the iron.
1
2 "SensorSteam" function will be activated and the indicator
lamp (2) will lash.
3 The "eco" steam mode is automatically selected.
4 The "TempOK" indicator lamp (13) will lash, indicating that
the iron is heating up. When the iron is ready to use, the
indicator lamp will remain lit continuously.

3. Setting the temperature

Set the temperature control (13) to the corresponding position by
lining it up with the temperature index (12) on the iron.
Temperature
●
●●
●●●
max
Tip: Start by ironing the fabrics that require the lowest ironing
temperature. Check the recommended ironing temperature on
the label on the garment.
Suitable for
synthetics
silk – wool
cotton
linen