Installation Steps; Bringing Into Service - physa delirious Bedienungsanleitung

USER MANUAL
Bedienungsanleitung | Manuel d´utilisation | Istruzioni per l'uso | Manual de instrucciones | Instrukcja
1. PARAMETER
Item Configuration
Basic configure Elliptical pillow, hemicycle pillow
Damageable parts PU cover ,hand controller
molding PU cover size
Upper limit
Lowest limit
Back adjustment angle
Technical parameter
Foot adjustment angle
Bed load limits of up and
down
N.W

2. INSTALLATION STEPS

a) Open the box; place the bed to the proper position.
b) Connected the power then you can use it, as below picture shows.

3. BRINGING INTO SERVICE

Take the massage bed out of the box and then remove the foil.
Attention: Do not remove the foil with scissors or knives.
Connect the remote control and plug the power cord into an outlet.
Now you can start adjusting the height by using the remote control.
2000×720×80 (Toleran-
ce:±2%)
940±10
530±10
-20°~ +65°(Toleran-
ce:±10%)
0 ~ +20°(Tolerance:±10%)
200Kg
84Kg
9 9