Product Setup; Quick Installation - D-Link DUB-1310 Installationsanleitung

PrODUCT
SETUP

QUICK INStaLLatIoN

1. Before installing the DUB-1310, insert the CD-ROM into your
2. Shut down your computer and disconnect all cables connected
OFF
3. Open your computer case and install the DUB-1310 into an
4. Close your case, reconnect all cables, and start your computer.
dUB-1310
disc drive. Click on Install Drivers from the autorun menu, and
follow the prompts to install the drivers.
to it.
available PCIe slot. Connect a 4-pin power connector to the
power port on the card.
Your computer will automatically detect the DUB-1310 and install
drivers for it. Your DUB-1310 is now ready to use.
3