Philips HF390 Gebrauchsanweisung Seite 8

ENGLISH
8
Weighing with body fat percentage using personal
data from the memory
You can use this function if your personal data have already been
stored in one of the four memories.
C
1 Push the 'set' button to activate the body fat indicator function.
The display will go on and a blinking cursor appears below the setting
'free'.
C
2 Use the [¢] or [£] button to switch to one of the memories
indicated by 1 up to 4 at the top of the display within
5 seconds.
The screen will show the data stored (height, age and sex).
After 3 seconds the indication 0.0 kg on the display will start blinking.
C
3 As soon as the indication 0.0 kg stops blinking, you can step
onto the scales.
C
4 The scales first show your weight and then your fat
percentage. Next the fat indicator will appear showing your fat
percentage in relation to the recommended percentage.
5 The scales will switch off automatically.
Interpretation of body fat percentages
The body fat percentage is calculated by means of a bio-algorithm,
based on scientific research comprising over 40 clinical studies.
The fat indicator bar below the display gives you an indication of your
body fat. It shows whether your body fat percentage is:
- low: 1-2 dashes.
- normal: 3-6 dashes.
- (very) high: 7-10 dashes.