Herunterladen Diese Seite drucken

Very Important - Jata electro CF1030 Bedienungsanleitung

Metall-aufschnittmaschine

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
• VERY IMPORTANT: Do not immerse the food
slicer in water.
• ATTENTION: The blade is very sharp. Manipulate
it very carefully. After using always set the
cutting guide to the minimum.
• Use always the sliding carriage shield (4) and the shield-
pusher (5) placed in its place, only avoid it in case the
size or shape of the food does not allow it is in use.
• Always disconnect it from the mains when you
do not use it and before assembling /
disassembling or when cleaning.
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• This appliance has been designed for its intermittent use.
It must not be used uninterruptedly for periods of over
10 minutes. After the said period allow the appliance to
cool.
• This appliance has been designed for domestic use only.
• The cleaning and maintenance done by users, can not
be done by children without any supervision.
• If the cable were to deteriorate it must be changed by
an Authorised Service Centre.
INSTRUCTIONS OF USE
• Place the food slicer over a flat surface.
• Adjust the thickness required with the thickness regulator (3). The thickness indicator (2) may be
used as a guide.
• Place a dish or a tray on the left side of the food slicer.
• Place the food on the sliding carriage (4) and use the shield-pusher group (5) to press it slightly
on to the cutting guide (7).
• Plug the appliance into the mains.
• To start working the appliance push the on switch (1) to the I position.
• With the food slicer working, move the sliding carriage shield forwards and backwards.
9

Werbung

loading