Ce Declaration Of Conformity - Fermax 5276 Benutzerhandbuch

Cod. 97864 V09_18
User Information Transfer
User Information from Master controller to Slave controller is possible.
Connection Diagram:
Remarks:
The Master Units and Accept Units must be REF. 5276.
The Master Code of the Master Unit and the Accept Unit must be set to the same.
Program the transfer operation on Master Unit only.
If the Accept Unit are already with the users enrolled, it will be covered after transfer.
For full 1,000 users enrolled, the transfer takes 3 minutes.
Programming Step
1. Enter Program Mode
2. Set transferring
Within 3 minutes, Green LED blinks twice, indicating that users' information has been transferred
successfully.

CE DECLARATION OF CONFORMITY

Hereby, FERMAX ELECTRONICA, S.A.U., declares that this STAND-ALONE CONTROLLER 1 DOOR WG Ref. 5276, is in
compliance with the essential requirements of Directive RED 2014/53/UE and Directive RoHS 2011/65/UE. See website
www.fermax.com. FERMAX Avd. Tres Cruces, 133, 46017 Valencia, Spain.
http://docweb2.fermax.com/docs/decconformidad/EN/F05276.pdf
Keystroke Combination
* (Master Code) #
9 6 #
8