Led Evaluation - hedue C036 Bedienungsanleitung

'Freeze' measurement
You can freeze the maximum measurement with the HOLD
button.This is helpful if you cannot see the display during
HOLD
measuring.
Zero position
With the ZERO button you can calibrate the device on zero.
The measuring area or the pins may
ZERO
contact during that process.

LED evaluation

The scale of coulored lights enables a fast evaluation of the
measurement:
dry (Preset < 13%)
?
Limits (Preset 13% - 18%)
critical (Preset > 18%)
The presets of the threshold values of AL1 and AL2 can be
changed.
Press the SELECT button for about 7 or 9 seconds until the
SELECT
display shows:
AL1
Now use the buttons
HOLD
to change the treshold values.
14
AL2
oder
ZERO
not have material
AL1
AL2